|
Normalie
Tables with milled perimeter (toleration ± 0,1 mm), grinding base and
opposite side (toleration ± 0,05 mm). The toleration can be modified
according to the customer´s demand.
Milled tables
Shook are angular on the mills in toleration of –0,0 +0,2 mm, roughness Ra=6,3
µm. The toleration and surface can be adjusted individually. Matter of
course is that all tolls are without frays and they are deburred.
Shook
Tables cut from blocks (toleration –0/+ toleration according to the order),
broadly cut, raw side stays the same only if a customer agrees.
Free forging
We also sell free forgings, that are stored in our place or we are able to
produce them. Blocks are with raw metal-tipped or scrubbed (Ra=max. 0,8 µm)
surface. Required sizes with addition are presented in ČSN. It is also possible
to cut the frontal sides.
Division and rough-work of external material
We also work on the delivered material. We are experienced not only in dividing
of noble steel, but also in non-iron metals, alloys, silon and different
profiles or piping. We are able to cut the material very precisely (also the
rough-worked parts).
Other
Mechanic quality test of products according to a customer´s demand Structure
and chemical analysis included, non-destructive material test Consultancy in
choosing the right material and solving technical problems arisen from the
production
Deliver time is usually 3–5 days (from order) incl.
cutting. Material prices can be sent on the base of your order. Goods
expedition – blocks are packet on palettes, secured with fasciation. In
rough-worked parts goods is treated by preserving solution and wrapped in order
to prevent damage.
If you have any question or if you want to ensure our offer
contact our business department. Our experienced matallurquists are ready to
help you with any problems concerning material engineering.
We are pleased that you are interested in our products and
we are looking forward to our cooperation.
|
